(1) Steps of filling hydraulic oil
Uncover the cap of the oil tank and fill proper hydraulic oil until the oil level reaches the top point of the oil-level gauge. The oil level in the oil tank will decline due to every cylinder and pipeline will be full of oil after the first running of the machine, hydraulic oil should be added at this time to keep the oil level above the oil scale.
Note: (a) Please don’t mix hydraulic oil and lubricant of different product names.
(b) Starting the oil pump is not allowed within three hours after filling hydraulic oil into oil tank, to make sure the gas in the hydraulic oil can be removed.

(2) Lubricant
Please select proper lubricant using regularly and quantitatively, so as to ensure the working efficiency of the blow molding machine machine and also to extend its service life.
Note: (a) Please don’t mix hydraulic oil and lubricant of different product names.
(b) The driving motor of the pumps can not be started within three hours after its oil tank is filled in order to discharge the air in the oil fluid.