Suzhou Bestar blow molding machinery a high-quality equipment suppliers and manufacturers.To provide you with extrusion blow molding/blow molding machine/automatic blow molding machine.

News /

Common Features of Various Automatic Blow Molding Machines

There are many types of automatic blow molding machines. When we use them, we must pay attention to choose the right model for production. What we come into contact with below is one of them. We can find out about its characteristics.
Automatic Blow Molding Machine Features:
1. Each heating zone is provided with an independent temperature control section; the position and distance of the lamp tube and reflective plate in the heating zone can be adjusted according to the shape and size of the preform to achieve the best heating effect.
2. The use of constant pressure thermostat mode to control the infrared lamp heating of the preform, to ensure that the preform heating the right amount, accurate and stable, without the impact of input voltage changes.

3. The automatic blow molding machine according to different product needs can be matched for the double-chamber double-stretch cylinder, three-cavity three-stretch cylinder, four-cavity four-stretch cylinder or six-cavity six-stretch cylinder design, function can be separate Adjust the use of single-chamber single-stretch cylinder to meet the different needs of the machine or test mode.
4. The control system is equipped with an automatic reporting function; when an error occurs or a failure occurs, the computer will display an alarm.
5. It is convenient and quick to change the mould. It is not necessary to adjust the thickness of the mould in the range of the corresponding mould.
6. This fully automatic blow molding equipment is suitable for blowing 30 ml to 5 liters of cold and hot filled plastic bottles or other plastic containers.
7. The production process is fully automated. Multiple machines can be combined at the same time into a fully automated production line. The entire production process eliminates the need for manual contact with preforms or finished bottles.